Видео

thanks for your comments. Check out the FB chat-group if you havent do so yet and share your experiences. facebook.com/groups/244649784593138

the new v4.6 firmware solves this. Just got to await a stable release. At the time of writing this, v4.6 was released a couple of weeks ago with this feature but was riddled with bugs so was soon after withdrawn.

@@SLATEB0Y okay... Then i'll do my gig tomorrow on 4.5.2 or whatever it is 😁

I use mine with my Behringer xr18 and keep it in assigned channels, so I just mute at the mixer level. Great tip on group mute! Didn't know you could do that! 🙏🏼

Just noticed your update 🙂

@@MattyTNI yes- you got it. I didnt realise until the developer told me. Seems obvious now. Mind you, i dont like live mode as it is (with the firmware shown) and why its only for live mode i'm not sure

i tried the arduino-to-kemper-via-usb method too but also didnt get it working. Apparently you need to reflash the arduino to make it a class-compliant midi device in order for the kemper to recognise it as such. I have not done this myself and use a usb-to-midi adapter

@@SLATEB0Y alright thanks. I will look deeper into it

sorry, i dont know much about that at this time. I have no experience with this. However, what i understand that is the device can connect via wi-fi if you connect it to an external router via network cable and then "hop on" to that network, wifi or cabled. I believe the "hot spot" allows you to connect your wireless device direct to the b-beat (as a wifi hotspot!) without the need for additional equipment. Please check the manual or contact their support for a more accurate answer. here is my wireless demo: ruclips.net/video/JNNqc5BjnPY/видео.html

check out the info here: forum.kemper-amps.com/forum/thread/63049-top-tip-gain-a-volume-boost-without-using-an-fx-slot-or-morph-any-unit

@@SLATEB0Y ❤️🙏

Bizarrely i have gigged in a cave. Depending if you like caves, or not, that could be a compliment.

No midi control being used and no intention to change presets via midi. Eventually hoping to control lights/DMX via midi, one day...

No worries . Struggling one a video studio one specific for doing this for a helix . I’ll keep looking

Copy the "bbeatSysSw.upd" file (downloaded from the manufacturers website) onto a usb stick and insert into the b-beat. The b-beat detects the firmware-file and then gives you the option to install that version whilst displaying the current and USB stick versions

@@SLATEB0Y THANK YOU!

i know of no other modeller that has been around ten years and is still as great as the Kemper.

takes various video formats and converts it to its own internal format. Ideally load it with a 1920x1080 image. (check the manual for acceptable formats) as for the maximum length, i do not know. Our longest videos are less than 10mins

Please clarify what pedal/action you refer to

hi, thanks for your interest. I have always found the unit starts as soon as you press play- no delay. Apparently the new firmware (4.5) starts even quicker (pre-loads videos for this purpose) though i have no complaints with it as it was before. (4.1) The play button can skip to the next track ONLY if you double-tap it. As its a physical button it needs physical-intention to do this, unlike a touch-screen that may easily get double-triggered Regarding the stop button, you have understood. However, if you are in "live mode" you can not exit the setlist. hitting stop once is pause, a second hit rewinds to frame one of the video ready to restart that song. In live mode you can go no further but you can then use the up/down arrows to get the next song and (owing to a bug in the 4.5 firmware) the holding-screen does not appear. We therefore press stop a 3rd time (no using live mode) to exit the playlist and to display our holding-screen image. It only takes a couple of seconds to re-enter the playlist and get the next song running. I think they will fix this very soon though. Please check out my other b-beat videos if you havent done yet. Might answer further questions. Disclaimer: I offer no tec-support and have no affiliation with the company but happy to share my findings and experience with you.

thanks for sharing that, @lucasjuniorproducer. Top tip (for everyone) is therefore carry a spare power-supply unit. Readers take note!

I’m not Tec support, far from it, you would be better asking the developer. However, I believe it should be possible if you use the usb to the Kemper player and the MIDI-din connector for the other gear. Then send multi MIDI messages on the chosen button but have each device on its own MIDI channel.

@@SLATEB0Y Of course. Thank you.

please forward your concerns to the developers. Together, we can make this unit better.

please forward your concerns to the developers. Together, we can make this unit better.

Note this does not boost the value by +3dB but rather sets the rig-volume value to +3dB therefore the amount of change will be dependant on the initial value. Mine are stored as 0dB by default so there is a +3dB change To set rig volume to +3dB, you will need to send NRPN parameter 513 to value of 10255. This can be achieves with these midi CC commands; CC99=4 CC98=1 CC6=80 CC38=0 if you want to set rig-volume to 0dB send this midi data: CC99=4 CC98=1 CC6=64 CC38=0

Not faulty- Having consulted the developers, this latest issue is by design to pre-load videos rather than waiting for the play-button to be pressed. Therefore the first frame of the video is on screen immediately. This makes sense. However, this doesnt suit everyones situation, as described in the video

Not to my knowledge. The Kemper remote uses an ethernet connection which the player does not have. A standard midi controller would be the option with the addition of a USB-to-MIDI adapter, like this: ruclips.net/video/BVFuOkYalKA/видео.htmlsi=r8vKutExvhm70eRj&t=303

Sorry to disappoint you. This was a demo to show the potential of the guitar. If you want to hear the actual guitar you could search for those videos or, better still, play one for real in a music-shop. Similarly you will never really know what the neck and feel is until you try one yourself. This is just one opinion. Many users of this guitar have upgraded pickups so hopefully this demo may help there.

@@SLATEB0Y I can't go to a music-shop that has Jet guitars, so Im going to buy one without having seen and played one. I have watched all the demos on YT :) , so I thank you for your own demo too. Maybe you could have done an A/B comparison with the pickups, anyway thanks again

@@maxduke1943 thanks again for your comments. I should have done a before/after demo but didnt even plan on doing this one. Hopefully you can purchase from a shop where you have the option to return it if its not for you.

You need to use the PC/Mac editor: ruclips.net/video/7zaMd4FEOKg/видео.html

Thank you

the midi out is on a 1/8" jack (no midi in). To control various items you'd be best to have each piece of gear on its own midi channel. The hard task is programming your midi sequence to do all these jobs. You may wish to split your midi rather than run them all in series.

the pickups in this video are standard (not noiseless) pickups

thank you. sometimes we all need a little kick-start

you will find it in the kemper midi documentation available from their website. Its quite comprehensive

@@SLATEB0Yvery cool video. I can’t find parameter to previous/ next RIG for MIDI with the player. Could you help me please ? Thanks !

@@sal1978man probably best to check out the Kemper forums. I’m sure I saw this question asked on there recently.

@@SLATEB0YI will . Thanks for answering.

@@sal1978man here you go forum.kemper-amps.com/forum/thread/63692-player-midi-commands-for-rig-next-and-rig-last/

nailed vocals

i think so too

Have never used IRs on the kemper

@@SLATEB0Y I agree, neither have I. There's something magical about the Kemper cabinets.

Nothing. If you are interested you would be best to find message him on the Facebook group chat, facebook.com/groups/244649784593138

Agree. No idea what the max size SD-card you can use. Not read or seen anyone who has done this yet. Whether there's any side-effects to doing this, i dont know. Let us know if you do successfully use a different SD card

Thank you

The pickups in this video demo are these- www.temu.com/goods_snapshot.html?goods_id=601099542950605 And this www.temu.com/goods.html?_bg_fs=1&goods_id=601099518218289 Thoughts and comments on that?

@@SLATEB0Y They sound very good, didnt expect they where ceramic pickups tbh

you can downgrade from the current 4.0.3 to 3.5 but whether this recommended or safe i cant comment. Plus make sure your pc/mac manager software matches. Perhaps that's why they have the older version still available on their website? Let us know how you get on?

@@SLATEB0Y will do. Thanks dude 👍🏻